求助中興B860AV3.2-T S905L3SB 刷完機黑屏，HDMI無顯示

liubaochuan · 發表于 2025-11-13 08:01

本帖最后由 liubaochuan 于 2025-11-13 11:43 編輯

刷機包用的大全里的

TTL2.txt (16.51 KB, 下載次數: 3)

TTL.txt (2.44 KB, 下載次數: 3)
試過好幾個
919-電信高安版-晶晨（S905L3SB）芯片-2+8G_安卓9.0_線刷固件包
都屬無限循環重啟

liubaochuan · 發表于 2025-11-13 08:05

看TTL日志無限循環U-Boot 未找到可啟動的 OS 鏡像（未進入內核加載階段）

劉小金 · 發表于 2025-11-13 09:33

你要說清楚你機子的完整型號和具體配置,以及你使用的何種刷機工具和刷機包,大家才能幫你想辦法解決.

匿名 *發表于 1970-1-1 08:00* | 未知 · 發表于 1970-1-1 08:00

post_deleted

月光※傾城 · 發表于 2025-11-13 11:01

y598 發表于 2025-11-13 10:38
哪款，加下V: Y-xt855

下次再發這樣的回復，我直接舉報你

liubaochuan · 發表于 2025-11-13 11:41

劉小金發表于 2025-11-13 09:33
你要說清楚你機子的完整型號和具體配置,以及你使用的何種刷機工具和刷機包,大家才能幫你想辦法解決. ...

emmc/sd response timeout, cmd55, status=0x1ff2800
init_part() 294: PART_TYPE_AML
[mmc_init] mmc init success
init_part() 294: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
SDIO Port C: tuning start:
Data 1 aligned delay is 0
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: best_win_start =0, best_win_size =4
meson-mmc: emmc: [ 4 ] is nok
meson-mmc: emmc: [ 0 -- 3 ] is ok
adjust 0x22000, clock 200000000
switch to partitions #0, OK
mmc1(part 0) is current device
Device: SDIO Port C
Manufacturer ID: 2f
OEM: 111
Name: 05S00
Tran Speed: 200000000
Rd Block Len: 512
MMC version 5.1
High Capacity: Yes
Capacity: 7.3 GiB
mmc clock: 200000000
Bus Width: 8-bit
[store]amlmmc erase 1emmckey_is_protected : protect
start = 0,end = 57343

Caution! Your devices Erase group is 0x400
The erase range would be change to 0x36000~0xe9ffff

start = 221184,end = 15335422
[MSG]usb producing env_relocate
mmc env offset: 0x3ee00000
*** Warning - bad CRC, using default environment

Saving Environment to aml-storage...
mmc env offset: 0x3ee00000
Writing to MMC(1)... done
刷機卡這里

liubaochuan · 發表于 2025-11-13 11:42

月光※傾城發表于 2025-11-13 11:01
下次再發這樣的回復，我直接舉報你

emmc/sd response timeout, cmd55, status=0x1ff2800
init_part() 294: PART_TYPE_AML
[mmc_init] mmc init success
init_part() 294: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
SDIO Port C: tuning start:
Data 1 aligned delay is 0
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: clk 200000000 tuning start:
SDIO Port C: best_win_start =0, best_win_size =4
meson-mmc: emmc: [ 4 ] is nok
meson-mmc: emmc: [ 0 -- 3 ] is ok
adjust 0x22000, clock 200000000
switch to partitions #0, OK
mmc1(part 0) is current device
Device: SDIO Port C
Manufacturer ID: 2f
OEM: 111
Name: 05S00
Tran Speed: 200000000
Rd Block Len: 512
MMC version 5.1
High Capacity: Yes
Capacity: 7.3 GiB
mmc clock: 200000000
Bus Width: 8-bit
[store]amlmmc erase 1emmckey_is_protected : protect
start = 0,end = 57343
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x36000~0xe9ffff
start = 221184,end = 15335422
[MSG]usb producing env_relocate
mmc env offset: 0x3ee00000
*** Warning - bad CRC, using default environment
Saving Environment to aml-storage...
mmc env offset: 0x3ee00000
Writing to MMC(1)... done
刷機卡這里

復制代碼

劉小金 · 發表于 2025-11-13 19:14

首先你要搞清楚你那盒子的主控是S905L3S-B還是S905L3-B.然后確定是否是高安版的.找對包配合晶晨短接神器就應該刷成功.

我嘞個神啊 · 發表于 2025-11-13 21:51

買個固件馬上就能解決只不過固件會比你盒子貴

liubaochuan · 發表于 2025-11-14 08:42

劉小金發表于 2025-11-13 19:14
首先你要搞清楚你那盒子的主控是S905L3S-B還是S905L3-B.然后確定是否是高安版的.找對包配合晶晨短接神器就 ...

S905L3S-B能刷成功就是開不了機

› 綜合交流 / 資源分享區 › 綜合交流大區